More than 50 years of continuous progress has developed into a symbiosis between traditional casting production and new industrial techniques.
With our technical equipment and human resources we apply this symbiosis on a daily basis, which gives us the means to fulfill the requirements of the cast parts.
Total surface area: 14.500 M2
Facilities: 4.000 M2
Production: 250 Tn./Month
Staff: 48 employees
APPROVALS / CERTIFICATIONS
ISO 9001 por Det Norsek Veritas.
AMERICAN BUREAU SHIPPING
We manufacture all types of cast parts from drawings or patterns in Cast Iron.
Cast Aluminum using Greensand molding process and Furan Resin.
Machining and Cast Assemblies.
SECTORS AND TYPICAL PARTS Marine and Industrial castings are much of our production output.
We manufacture parts such as: Stern tube bushings, keels, bearing housings, propellers, keels, bearings, etc for marine industry.
Hydraulic pumps, turbine cores, machine components, bronze and brass parts, flywheels cast in gray iron, tractor-truck, pulleys, etc for the industrial sector.
Our aim is to ensure our customers satisfaction , meet the delivery dates, and fulfilling the required quality and environment standards.
MATERIAL PRODUCTION (TONS/YEAR)
Grey iron EN-GJL-200, EN-GJL 250, EN-GJL 400: tons/year.
Nodular iron EN-GJS-400-15, EN-GJS-400-18 U TL, EN-GJS-500-7, EN-GJS-
600-3: 600 tons/year.
Other white irons; Ni-hard, Ni-resist, high chromium
Carbon steel and alloys. Manganese Steel.
Refractory Steel. Aluminum and Bronze.
MOLD / PATTERN
Manual mold (resin)
Chemical molds up to boxes of 3000 X 3000 mm
SEMIAUTOMATIC MOLDS FROM GREEN SAND
Type of mold container (mm).
Container of 450 X 500 X 125/200 (height).
Container of 850x705x 150/250/300 (height).
Container of 990x750x120 (height).
Centrifugal tube from 120 to 720 mm in diameter and up to 1500 mm in length, for motor housings, compressors, etc.
METHODS OF PRODUCTION
2 Induction ovens, Inductoterm
1 Rotating oven with oxy-combustion natural gas.
3 Gas ovens for bronze and aluminum.
Mass Spectrometer, Cooling curve, Hardness, Tension, metallographic analysis,
Penetrating liquids and magnetic particles.
WEIGHT RANGE (KG)
Up to 8000 kg for parts cast in grey or nodular iron.
Up to 1400 kg for molded steel parts
Up to 1500 kg for molded bronze parts
Up to 450 kg for aluminum parts.
In cast gray, nodular, steel, bronze, and aluminum from 1 to 50 parts per month.
Larger series of cast gray, nodular, steel, bronze, and aluminum up to 600 parts per month.
• Gray cast iron EN-GJL-200, EN-GJL-250, GG- EN-GJL 300 and nodular EN-GJS-400, EN-GJS-400-18-LT, EN-GJS-500, EN-GJS-600, EN-GJS-700.
• Ni-hard, casting with high chromium content more resistant such as GX-280 CrMoNi 20.2.1, GX-340 CrMo 27.2, Gx-300 Cr13, etc.
• Carbon steels and alloys: GS-45. GS-52, GS-60, GS-20Mn5, GS-42CrMo4, GS-25CrMo4
• Manganese steels: GX-120 Mn12, GX-100 Mn12, GX-120 Mn Cr 12.2
• Refractory steels: GX-40 CrNiSi 25.12 GX-40 CrNiSi 25.20, GX-35 CrNiSi 37.17, GX-45 CrSi 29
•Bronze Rg-5, Rg-10, 90/10, Brass F-45 and Aluminum